Splitting Stone Machinery
A splitting stone machine uses hydraulic or mechanical force to fracture large stone blocks into slabs or manageable pieces. Designed for granite, marble, or limestone, it employs wedge systems or pressurized blades for precise splitting. Ideal in quarries and workshops, it enhances efficiency, reduces manual labor, and minimizes material waste. Portable models enable on-site use, while industrial versions handle heavy-duty tasks. Eco-friendly and safer than traditional blasting, it ensures controlled, clean cuts for construction, landscaping, or monument production.
| Type | Unit | RSD-95Y |
| Overrall Dimension | cm | 200×100×220 |
| Power | kw | 11 |
| Voltage | v | 380 |
| Frequency | hz | 50 |
| Pressure | t | 80 |
| Flow Rate | l/m | 47 |
| Hydraulic Oil Grade | 46# | |
| Blade Feeding Speed | cm/s | 9 |
| Max.working Height | cm | 30 |
| Max.working Length | cm | 40 |
| Output/Hour | ㎡ | 18 |
| Oil Tank Capacity | 350L/290KG | |
| Packing Size | cm | 210×110×2230 |
| Total Weight | t | 2 |
Troubleshooting method of splitting stone machinery
To troubleshoot a splitting stone machinery, follow these common methods and solutions:
Machine Not Starting
Possible Causes: Power supply issues, faulty start capacitor, tripped thermal protection, blown fuse, or circuit breaker.
Solutions: Check the power source and inspect power cords. Test and replace the start capacitor if needed. Reset the thermal protection switch after the motor cools down. Check and replace fuses or reset circuit breakers.
Slow Splitting Speed
Possible Causes: Loose belt tension, dull splitting wedge, low hydraulic pressure.
Solutions: Tighten the belt, sharpen or replace the splitting wedge, and ensure the hydraulic system is operating at the correct pressure.
Large Swing of the Splitting Cylinder
Possible Causes: Damaged output shaft bearings, worn clamp plate, or poor installation of the splitting wedge.
Solutions: Replace the bearings, clamp plate, or reinstall the splitting wedge correctly.
Hydraulic System Overheating
Possible Causes: Prolonged operation without depressurizing the system.
Solutions: Depressurize the hydraulic system by switching off the hydraulic pump unit or setting the control valve lever to the neutral position.
Inconsistent Splits
Possible Causes: Misaligned splitting wedge or uneven pressure application.
Solutions: Ensure the splitting wedge is properly aligned and centered. Use a level to check the alignment and adjust if necessary.
Machine Vibrations During Operation
Possible Causes: Worn or damaged components, unbalanced splitting wedge.
Solutions: Inspect and replace worn components. Ensure the splitting wedge is properly balanced and centered.
Splitting Cylinder Not Retracting
Possible Causes: Faulty control valve or hydraulic system issues.
Solutions: Check the control valve for proper operation. Inspect the hydraulic system for leaks or blockages.
Splitting Wedge Stuck in Stone
Possible Causes: Excessive force or incorrect wedge installation.
Solutions: Ensure the wedge is fully retracted before inserting it into the stone. Use appropriate force and follow the manufacturer's guidelines.
Hot Tags: splitting stone machinery, China splitting stone machinery manufacturers, suppliers, factory, Cutting Granite Blade, Core Drill Bit Welding, Stone Splitter, 5 Axis CNC Bridge Saw Cutting Machine, Granite Polishing Machine, Segments Brazing Equipment
Previous
Splitting Marble MachineYou Might Also Like
Send Inquiry