Dec 25, 2023 Leave a message

Elements of air compressor selection

1. Compressed air use.


2. Minimum operating pressure.


3. Tip and off-peak demand air volume. If the difference between the maximum and minimum operating pressure is 3 bar, it is necessary to consider the "high and low pressure shunt", and then choose different types of air compressors according to the change of the burden of the tip and the departure peak, such as centrifugal (single machine > 75CMM) or spiral type (single machine) for "base load". <60CMM): "Variable loads" are handled by high-pressure air turbines and large air storage drums.


4. According to different gas quality, different forms and grades of dryers and precision filters are selected and configured, too good quality wastes energy, and insufficient quality affects the process, which must be carefully considered.


5. The control technology of air compressor is changing with each passing day, and technologies such as "multi-machine interlocking", "variable frequency and variable speed" and "remote monitoring" can effectively suppress the waste of centrifugal BOV and spiral empty vehicles (saving 25-40% of electricity costs), reduce standby capacity and investment (15-30%), and stabilize the air supply pressure (plus or minus 0.1bar).

 

diesel air compressor


6. Operational efficiency should not only compare the nominal horsepower and air volume in the catalog, but also the actual "performance curve" and "air volume per horse".


7. Considering the size of the computer room space for installation, ventilation conditions, noise isolation, waste heat, waste water recycling, etc., all lead to the use of energy. In addition, "centralized" has lower installation, maintenance, and control costs than "distributed", and can also reduce peripherals.


8. As for the cooling methods, there are two kinds of cooling methods: air cooling and water cooling, air cooling does not need to invest in additional cooling tower rainwater, but there must be good ventilation: water cooling is that the operating temperature is not affected by the environment, which is conducive to the life of the air compressor, and only has the disadvantages of ice bursting and blockage.


9. The stability of the planned voltage demand and voltage drop of the power supply must require that the centrifuge is usually of high voltage, completely immobile, and will cause an impact on the power grid when it starts, so it should be kept in regular operation.


10. The maintenance machine room should have proper maintenance space, necessary lifting facilities and access channels, and engineering personnel and maintenance personnel should also be given different maintenance professional training.

 

Send Inquiry

Follow Us

whatsapp

Phone

E-mail

Inquiry