How to assess the performance of diamond wire saw machine
Assessing the performance of a diamond wire saw machine involves evaluating several key criteria. Here are the main aspects to consider:
Cutting Rate
The cutting rate is one of the most important criteria in the evaluation process. Research using numerical modeling and PFC3D software has shown that the wire peripheral speed and pullback amperage are directly related to the cutting rate. Optimal values for these parameters are the highest possible values. For granitic rock, the optimal number of beads per unit length of wire is 36, and the optimal bead diameter is 1 cm. The machine pullback amperage is the most effective parameter on the cutting rate. An empirical equation between the cutting rate and these parameters has been developed, which can be used to predict and improve the performance of diamond wire saws in granite stones' cutting.
Sawing Force and Power
The sawing force and power consumption are critical in evaluating the efficiency of the machine. Lower sawing force and power consumption indicate higher energy efficiency. For example, brazed diamond wires have been shown to perform with lower sawing force (less 16% of tangential force and 28% of normal force) and more energy efficiency (nearly one-fifth of sawing power is saved) compared to sintered diamond wires.
Contact Curve Linearity
The linearity of the contact curve is important for high-dimensional accuracy, particularly in profile sawing. The improved linearity of the contact curve for brazed wires compared to sintered wires suggests that brazed wires are preferable for profile sawing.
Sawing Efficiency
Sawing efficiency, often assessed by the feed rate, is a key performance indicator. The feed rates of brazed and sintered wires increase with the normal force and wire speed. However, for a specific combination of sawing parameters, the brazed wire has nearly two times the feed rate of the sintered wire. This outcome supports the results mentioned above, indicating that the cutting ability of the brazed wire is greatly enhanced and the sawing rate is doubled.
Wear Rate
The wear rate of the diamond wire is another important factor. An adaptive neuro-fuzzy inference system (ANFIS) can be applied to estimate the wear rate of diamond wire saws under uncertain processes. This helps in predicting the lifespan and maintenance requirements of the wire.













