1. If the following situations are found, the high-speed polishing machine shall not be used
The operator is not professionally trained.
The operator has not studied the "Safety Operating Procedures".
The high-speed polishing machine is not working properly.
2. Before using the high-speed polishing machine, the following inspections should be done on the environment
The operator's hands and feet should be kept away from the rotating polishing head.
The operator must not step on the power cord or wrap it inside the polishing head.
Operators must dress safely.
The polished area must not exceed the length of the power cord.
The operator shall not take off the operating handle without authorization. When the machine is stopped, the handle can only be released after the high-speed polisher has completely stopped rotating.
Do not polish with a polishing pad that has dust or dirt sticking to it. When the polishing pad with too much dirt cannot be cleaned, replace it in time.
When replacing and installing the polishing pad, the power supply must be cut off.
3. Storage of high-speed polishing machine
Cut off the power supply.
Tilt back and store the rear wheels on the ground.
It should not be stored outdoors and should be stored in a dry place.
