Stone Bridge Saw

Maintenance of Stone bridge saw for Stone Machinery

Stone bridge saw cutting machine is a commonly used stone machinery in the stone processing link. Because of its large-span bridge structure, it has a large degree of stone processing and a large cutting depth. It is often used to process curbstones and tombstones. At the same time, during use, if the operation is inaccurate or the maintenance is improper, the Stone Bridge saw cutting machine is prone to failure.

To ensure the normal operation of the Stone Bridge saw cutting machine
a. Stone bridge saw cutting machine and its surroundings must be kept clean and tidy, and no dust or dirt should be left. Its walking parts (including cable troughs) must be cleaned frequently and no obstacles should be left.

b. The main cutter of the Stone Bridge saw cutting machine must be oiled once a month and the oil must be changed every six months.

c. The gear rows on both sides of the Stone bridge saw need to be buttered once a week, and the slide rail oil should be checked once a month. The oil must be added to the same height as the slide rail.

d. Check regularly to ensure that the circuits of the boom opening and lowering and sliding switches are intact, lubricate the movable joints of the claws regularly, and check the rubber pads of the claws to ensure that the claws work normally.

e. When the Stone bridge saw is in operation, if there is a water outage or other faults, immediately lift the knife holder and shut down the machine for inspection.

Hot Tags: stone bridge saw, China stone bridge saw manufacturers, suppliers, factory, Core Drill Bit Welding, Cutting Granite Blade, Electric Screw Air Compressor Mobile, Stone Cutting Brigde Saw, , Stone Block Bridge Cutting Machine