The width of an excavator varies depending on its size and model. Here are some examples based on recent data:
Mini Excavators
Yanmar 45 Excavator: Overall width is 1,550 mm (61.0 in) .
Mitsubishi MX 45 Excavator: Overall width is 1,600 mm .
Compact Excavators
Doosan DX 140 Excavator: Overall width is 2,200 mm .
Kobelco SK140 Excavator: Overall width is 2,490 mm .
Medium Excavators
Cat 320 Excavator: Overall width is 10 ft 5 in (3.17 meters) .
Volvo 220 Excavator: Overall width is 2,600 mm .
Large Excavators
Cat 395 Excavator: Overall width is 3,200 mm .
Cat 325 Excavator: Overall width is 2,500 mm .
Standard Width Ranges
Mini Excavators: 3-7 feet (0.9-2.1 meters)
Compact Excavators: 7-10 feet (2.1-3.0 meters)
Medium Excavators: 10-12 feet (3.0-3.6 meters)
Large Excavators: 10-12 feet (3.0-3.6 meters)
These dimensions are crucial for determining the excavator's maneuverability and suitability for different job sites. Always refer to the specific model's specifications for precise measurements.
how to start hitachi excavator
To start a Hitachi excavator, follow these steps based on the latest guidelines from the Hitachi Excavator Operator Manual:
Pre-Operation Safety and Inspection
1.Safety Equipment Check:
Always wear the necessary Personal Protective Equipment (PPE), including a hard hat, safety goggles, high-visibility vest, steel-toed boots, and ear protection.
Ensure the seat belt is in good condition and fastened.
2.Machine Inspection:
Conduct a thorough inspection of the machine. Check for any leaks, loose components, or signs of damage.
Verify that all safety features, such as lights and alarms, are in working order.
Starting the Engine
1.Pre-Start Procedure:
Adjust the seat and seat belt for comfort and safety.
Ensure all control levers are in the neutral position.
Check that the pilot control shut-off lever is in the LOCK position.
2.Starting the Engine in Ordinary Temperature:
Turn the engine control dial to the slow idle position.
Sound the horn to alert bystanders.
Turn the key switch to rotate the starter. The engine will start.
Release the key switch immediately after the engine has started. It will automatically return to the ON position.
3.Starting the Engine in Cold Weather:
Turn the engine control dial to around the middle between the slow and fast idle positions.
Turn the key switch to the "ON" or "HEAT" position and hold it until the preheat indicator goes OFF.
As soon as the preheat indicator goes OFF, return the key switch to the START position to run the starter.
Post-Start Checks
1.Monitor Indicators:
Check the monitor panel to ensure all indicators are normal. If any abnormality is found, immediately stop the engine and investigate.
2.Check Engine Noise and Exhaust Gas:
Ensure the engine noise and exhaust gas are normal.
By following these steps, you can safely and effectively start a Hitachi excavator. Always refer to the specific operator's manual for detailed instructions and safety guidelines.
how to run a excavator
To operate an excavator safely and effectively, follow these steps based on the latest guidelines and instructions:
Pre-Operation Safety and Inspection
1.Read the Operation Manual: Familiarize yourself with the excavator's controls, safety features, and operating procedures.
2.Safety Equipment Check:
Ensure the seat belt is in good condition and fastened.
Verify the operator canopy (ROPS/TOPS) is properly installed and undamaged.
Check mirrors and replace any damaged ones.
3.Machine Inspection:
Inspect the hydraulic system for leaks and damage.
Check the fuel and hydraulic fluid levels.
Ensure all controls and attachments are properly secured.
Starting the Excavator
1.Pre-Start Procedure:
Adjust the seat and seat belt for comfort and safety.
Lower the control console to activate the hydraulic controls.
Ensure all control levers are in the neutral position.
2.Starting the Engine:
Turn the key to the ON position and start the engine.
Allow the engine to warm up at low idle speed.
Operating the Excavator
1.Basic Controls:
Use the joystick controls to operate the boom, arm, and bucket.
Engage the travel controls to move the excavator forward, backward, and to rotate.
The left joystick controls the boom and dipper arm, while the right joystick controls the bucket and swing.
2.Safety While Operating:
Always wear the seat belt and operate from the operator's seat.
Keep bystanders out of the work area.
Avoid operating on slopes exceeding 15°.
3.Using Attachments:
Ensure all attachments are properly secured and approved by the manufacturer.
Follow the guidelines for installing and removing attachments.
Post-Operation
1.Shutting Down:
Lower the boom and bucket to the ground.
Turn off the engine and remove the key.
Engage the parking brake.
2.Maintenance:
Perform daily maintenance checks, including fluid levels and system inspections.
Clean the machine to prevent corrosion and damage.
Additional Safety Tips
Fire Prevention: Keep the machine clean and avoid using open flames near fuel or hydraulic fluid.
Electrical Safety: Disconnect the battery before welding or grinding.
By following these steps and adhering to the safety guidelines provided, you can operate an excavator safely and efficiently.
how to run a bobcat mini excavator
To operate a Bobcat mini excavator safely and effectively, follow these steps and guidelines:
Pre-Operation Safety and Inspection
1.Read the Operation Manual: Familiarize yourself with the Bobcat mini excavator's controls, safety features, and operating procedures.
2.Safety Equipment Check:
Ensure the seat belt is in good condition and fastened.
Verify the operator canopy (ROPS/TOPS) is properly installed and undamaged.
Check mirrors and replace any damaged ones.
3.Machine Inspection:
Inspect the hydraulic system for leaks and damage.
Check the fuel and hydraulic fluid levels.
Ensure all controls and attachments are properly secured.
Starting the Excavator
1.Pre-Start Procedure:
Adjust the seat and seat belt for comfort and safety.
Lower the control console to activate the hydraulic controls.
Ensure all control levers are in the neutral position.
2.Starting the Engine:
Turn the key to the ON position and start the engine.
Allow the engine to warm up at low idle speed.
Operating the Excavator
1.Basic Controls:
Use the joystick controls to operate the boom, arm, and bucket.
Engage the travel controls to move the excavator forward, backward, and to rotate.
2.Safety While Operating:
Always wear the seat belt and operate from the operator's seat.
Keep bystanders out of the work area.
Avoid operating on slopes exceeding 15°.
3.Using Attachments:
Ensure all attachments are properly secured and approved by Bobcat.
Follow the guidelines for installing and removing attachments.
Post-Operation
1.Shutting Down:
Lower the boom and bucket to the ground.
Turn off the engine and remove the key.
Engage the parking brake.
2.Maintenance:
Perform daily maintenance checks, including fluid levels and system inspections.
Clean the machine to prevent corrosion and damage.
Additional Safety Tips
Fire Prevention: Keep the machine clean and avoid using open flames near fuel or hydraulic fluid.
Electrical Safety: Disconnect the battery before welding or grinding.
By following these steps and adhering to the safety guidelines provided by Bobcat, you can operate a mini excavator safely and efficiently.
how to release hydraulic pressure on excavator
To release hydraulic pressure on an excavator, follow these steps to ensure safety and proper maintenance:
Steps to Release Hydraulic Pressure
1.Ensure Safety:
Stop the Engine: Turn off the excavator's engine to prevent any accidental movement.
Engage Safety Devices: Ensure the safety lever or parking brake is engaged.
2.Follow Manufacturer's Instructions:
Refer to the excavator's manual for specific procedures. The manual will provide detailed instructions on how to safely release hydraulic pressure.
3.Release Pressure:
Lower the Boom: Lower the boom and other attachments to the ground.
Relieve Pressure: Use the appropriate controls to relieve hydraulic pressure. This often involves moving the controls to their neutral positions.
4.Check for Leaks:
After releasing the pressure, inspect the hydraulic system for any leaks. This helps ensure that the system is safe to work on.
Additional Tips
Use Proper Tools: When performing maintenance, use the correct tools to avoid damaging the hydraulic system.
Regular Maintenance: Regularly check and maintain the hydraulic system to prevent issues and ensure optimal performance.
By following these steps, you can safely release hydraulic pressure on an excavator, ensuring a safe working environment and preventing potential damage to the machine.
What are the key safety features to check before starting the excavator
Before starting an excavator, it is crucial to conduct a thorough safety inspection to prevent accidents and ensure the machine is in proper working condition. Here are the key safety features and checks you should perform:
Pre-Operation Safety Checks
1.Read the Operator's Manual: Familiarize yourself with the controls and safety information specific to the excavator you will be operating.
2.Check Fluid Levels:
Ensure hydraulic fluid, engine oil, and coolant are at appropriate levels.
Look for any leaks in the hydraulic system.
3.Inspect the Machine:
Check for loose bolts, damaged parts, and any debris buildup.
Examine the tracks or tires for proper condition.
Ensure all protective covers and safety devices are intact.
4.Check Safety Equipment:
Confirm that the seat belt is functioning properly.
Ensure the fire extinguisher is in good condition and accessible.
Verify that mirrors are clean and properly adjusted.
5.Verify Attachments: Ensure all attachments are securely in place.
6.Check Ground Conditions: Assess the stability of the ground to prevent instability or tipping.
7.Clear the Work Area: Ensure the area is free of obstacles and unauthorized personnel.
8.Check for Underground Utilities: Confirm the location of any underground lines or structures to avoid damage.
9.Test Controls: Perform a functional test of all controls to ensure they are responsive and working correctly.
10.Engage Safety Devices: Ensure the safety lever (parking brake) is engaged before starting the engine.
During Operation
Use Restraint Systems: Engage the operator restraint system if provided.
Check Surroundings: Always check the area before operating any controls to ensure no one is in danger.
Operate Smoothly: Avoid sudden or abrupt movements.
Follow Procedures: Adhere to the manufacturer's recommended operating procedures.
Do Not Overload: Ensure the excavator is not loaded beyond its safe working load.
After Operation
Lower Attachments: Lower the bucket and other attachments to the ground before shutting down.
Park Safely: Park the excavator on flat, stable ground with the engine off and the parking brake applied.
Secure the Machine: Remove the ignition key and lock the cab door.
By following these pre-operation safety checks and precautions, you can significantly reduce the risk of accidents and ensure the excavator is in optimal condition for use.
how to run a mini excavator
To operate a mini excavator safely and efficiently, follow these steps:
Pre-Operation Checks
1.Familiarize Yourself with the Machine:
Read the operator's manual and any warning stickers on the machine.
Locate all controls and understand their functions.
2.Inspect the Machine:
Check for loose or damaged parts, leaks, and any other potential hazards.
Ensure the tracks or tires are in good condition.
3.Check Fluid Levels:
Ensure hydraulic fluid, engine oil, and coolant are at appropriate levels.
Fill the fuel tank with the correct type of diesel.
4.Personal Protective Equipment (PPE):
Wear a hard hat, safety glasses, gloves, steel-toed boots, reflective vest, and ear protection.
5.Work Area Inspection:
Clear the area of obstacles and bystanders.
Identify and mark any underground utilities.
Starting the Excavator
1.Enter the Cab:
Use three points of contact when entering the machine.
Fasten the seat belt securely.
2.Start the Engine:
Ensure all controls are in the neutral position.
Turn the ignition key and start the engine.
Operating the Excavator
1.Controls:
The right joystick controls the bucket and stick.
The left joystick controls the machine's rotation.
The levers control the drive tracks, throttle, and front blade.
2.Traveling:
Push both long handles away to move forward.
Pull both long handles towards you to move backward.
To turn left, push the right handle away and release the left handle.
To turn right, push the left handle away and release the right handle.
3.Safety During Operation:
Avoid sudden movements.
Keep the bucket close to the ground when transporting loads.
Drive at a safe speed, especially on rough terrain.
Avoid driving diagonally on hills.
Post-Operation Checks
1.Lower Attachments:
Lower the bucket and other attachments to the ground.
2.Park Safely:
Park the machine on a level surface and engage the parking brake.
3.Secure the Machine:
Remove the ignition key and lock the cab door.
Additional Tips
Training: Consider taking a training course to enhance your skills and safety awareness.
Regular Maintenance: Follow the manufacturer's maintenance schedule to ensure the machine remains in good condition.
By following these steps and precautions, you can operate a mini excavator safely and efficiently. Always refer to the specific operator's manual for detailed instructions tailored to your machine.
how to run a excavator
To operate an excavator safely and effectively, follow these steps based on the latest guidelines and instructions:
Pre-Operation Safety and Inspection
1.Read the Operation Manual: Familiarize yourself with the excavator's controls, safety features, and operating procedures.
2.Safety Equipment Check:
Ensure the seat belt is in good condition and fastened.
Verify the operator canopy (ROPS/TOPS) is properly installed and undamaged.
Check mirrors and replace any damaged ones.
3.Machine Inspection:
Inspect the hydraulic system for leaks and damage.
Check the fuel and hydraulic fluid levels.
Ensure all controls and attachments are properly secured.
Starting the Excavator
1.Pre-Start Procedure:
Adjust the seat and seat belt for comfort and safety.
Lower the control console to activate the hydraulic controls.
Ensure all control levers are in the neutral position.
2.Starting the Engine:
Turn the key to the ON position and start the engine.
Allow the engine to warm up at low idle speed.
Operating the Excavator
1.Basic Controls:
Use the joystick controls to operate the boom, arm, and bucket.
Engage the travel controls to move the excavator forward, backward, and to rotate.
The left joystick controls the boom and dipper arm, while the right joystick controls the bucket and swing.
2.Safety While Operating:
Always wear the seat belt and operate from the operator's seat.
Keep bystanders out of the work area.
Avoid operating on slopes exceeding 15°.
3.Using Attachments:
Ensure all attachments are properly secured and approved by the manufacturer.
Follow the guidelines for installing and removing attachments.
Post-Operation
1.Shutting Down:
Lower the boom and bucket to the ground.
Turn off the engine and remove the key.
Engage the parking brake.
2.Maintenance:
Perform daily maintenance checks, including fluid levels and system inspections.
Clean the machine to prevent corrosion and damage.
Additional Safety Tips
Fire Prevention: Keep the machine clean and avoid using open flames near fuel or hydraulic fluid.
Electrical Safety: Disconnect the battery before welding or grinding.
By following these steps and adhering to the safety guidelines provided, you can operate an excavator safely and efficiently.





















