Precautions before using the circular saw for stone mining
Before using the circular saw for stone mining for the first time, check whether the rail straightness is good, whether the bottom is flat, and whether there is any looseness.
Check whether the spindle box oil is filled in place, whether the hydraulic oil reaches the required position, whether the turbine box oil has been filled, and whether the chain and slide are brushed and lubricated.
Whether the cables and water pipes are connected well, and whether the voltage is within the normal range.
When installing the saw blade, the installer must stand within the safe range, and overloading and oblique pulling are strictly prohibited.
Check whether the saw blade nut is locked and whether the saw blade deflection is within the normal range.
Operator protection is good.
