How to maintain a forklift for granite mining?
forklift for granite mining Before operating the loader each time, check whether the external shape is damaged or damp, check the liquid level of the three containers of water, oil, and gas, and decide whether to add.
Clean the dust, dirt and other pollutants around the engine and chassis to improve the cooling effect, reduce the risk of wear and accumulation of debris.
Every 50 hours of operation, check the internal components and various systems to ensure that there is no excessive wear and replace the air filter, fuel filter, diesel engine oil, and belt components in front of the diesel engine exhaust pipe.
Clean the transmission oil pan and transmission oil filter element after 250 hours; clean the oil pan filter and replace the transmission oil after 500 hours; disassemble the transmission and torque converter for inspection and repair after 2000 hours.
Hydraulic components must be cleaned and assembled only after the oil circuit is unblocked.
Correctly assembled components, such as the "Y" ring opening cannot be installed upside down and the pipe cannot be connected incorrectly.
Fixed oil change intervals. Changing the oil at the correct time interval is the key to obtaining the longest working life of the components in the transmission.
Use the correct method of draining and changing the oil. The oil temperature should reach 40-50℃ when draining, and the oil flow should be discharged while stirring. The dirty oil should be drained as thoroughly as possible. When refueling, a refueling machine with a filtering device should be used to add oil.
forklift for granite mining
