Dec 20, 2023 Leave a message

Noise Control Of Air Compressors

    The noise control of air compressors mainly comprises three aspects: Silencer, anechoic chamber and soundproofing technology:
    1. Installation of a silencer
    The main noise sources are the intake and exhaust ports, and suitable intake and exhaust silencers should be selected. The intake noise spectrum of air compressors is characterized by low frequencies, and the intake silencer should be selected with a resistant structure or an impedance composite structure based on individual and resistance.        The exhaust pressure of the air compressor is high and the air velocity is high, so a silencer with a small opening at the exhaust port of the air compressor should be used.

    2. Installing a silencer tunnel
    The underground or semi-underground tunnel of the anechoic tunnel, the tunnel wall is made of bricks with good sound absorption. Connect the air intake pipe of the air compressor to the anechoic tunnel so that the air enters the air compressor through the anechoic tunnel. By using an anechoic tunnel, the intake noise of the air compressor can be greatly reduced, and the service life is longer than that of general silencers.

    3. Fitting a sound insulation bonnet
    After installing a silencer or attaching a muffler to the air compressor inlet and outlet ports, the airflow noise can be reduced to less than 80 dB (a), but the mechanical noise and motor noise of the air compressor are still very high, so a sound enclosure should be installed on the air compressor unit.

    4. Sound absorbers for suspended rooms.

 

Send Inquiry

Follow Us

whatsapp

Phone

E-mail

Inquiry