Stone Splitting Machine RSL-24SSD (Four-Blade Manual Type)

Popular Science & Practical Guide for Stone Processors

1. What Is This Machine For?

The RSL-24SSD is a four-blade manual stone splitting machine, purpose-built for producing natural-faced paving stones (such as cobblestones, cube stones, and kerb stones). It takes small-cut stone blocks and splits them into uniform, rough-textured pieces that are widely used in garden paths, patios, and landscape projects.

This is the essential step that transforms a cut stone cube into a high-value, non-slip natural paving material.

(1) Hydraulic Splitting Force

The machine uses a 40-ton hydraulic cylinder to apply controlled, powerful pressure to the stone block.

Unlike cutting with a saw blade, splitting forces the stone to break along its natural cleavage lines.

This creates the desired rough, three-dimensional texture that cannot be achieved by cutting alone.

(2) Four-Blade Design for Efficiency

The "four-blade" (SSD) configuration is key to its productivity:

It holds four splitting blades, allowing a single stone block to be split multiple times in one operation.

This turns one block into several finished pieces in seconds, with an output of 10 cubic meters per hour, drastically increasing production speed.

(3) Manual Feeding & Foot Pedal Control

The machine is operated manually with a foot pedal:

An operator places the pre-cut stone block onto the worktable.

Pressing the foot pedal activates the hydraulic press, driving the blades into the stone.

This simple, hands-on control is ideal for small to medium-scale production and allows for precise handling of different stone types.

1. Paving Stones: Natural cobblestones, cube stones for driveways and walkways.
2. Landscape Design: Irregular wall cladding and garden features.
3. Curbstones: Rough-edged kerb stones for roads and edging.
4. Export Products: Uniformly split natural stone products for international markets.

• Use pre-cut blocks: Feed the machine with evenly cut stone blocks for consistent splitting results.
• Wear safety gear: Always use gloves and eye protection when feeding the machine.
• Keep blades sharp: Dull blades can crush the stone instead of splitting it cleanly.
• Check hydraulic oil regularly: Maintain the oil level to ensure smooth, powerful operation.

Hot Tags: manual cube stone splitter for natural face paving stone, China manual cube stone splitter for natural face paving stone manufacturers, suppliers, factory